How to install new tile over old tile

Tile is a high and classic choice for home. This beautiful idea, to use tile in home decoration comes in a variety of stylist choice to complement our decor choices.A tile is a manufactured piece of hard-wearing material to use form of wall and floor coverings, Tiles are most often made of ceramic, but it also made of stone, Rubber, plastic and glass .Mainly tiles are used in decorating of floor and wall but other materials are also commonly used, such as concrete, cork, glass, stone and other composite materials.

The glass tile is easy to clean and works well as an accent in a bar area, shower, kitchen backsplash and even as a feature wall.

IT’s a regular rules for us to check the existing floor for  finding any  problems on it. We can install new tile over an old tile floor if it is in good condition and no major cracks or any spot.

Needs to install new tile over old tile :

If the old tiles fall off, then we need new ones. Some time we have to faced some  problem in existing floor. If any tiles are cracked, that is a problem on tile over. If the tiles are damaged by using , then it need to be recovered ,The coating over existing tiles isn't recommended. There ar different factors like weight and dampish absorption which may conjointly cause us to re-think our set up.

Notifications to remember:

Removing existing flooring tile before putting in new tile is suggested, but typically previous tile are often terribly troublesome or nearly not possible to get rid of. If the first tile remains in glorious condition, then it's potential to put in tile over tile, however the correct steps should be taken so as to complete the project properly. If the first tile is broken then removing it's necessary.

If your existing floor tile isn't cracked and may give a solid foundation, it will function a subfloor for a replacement layer of tile to be put in on high of it.

 Another necessary precaution is to form certain your floor is level before putting in new tile. Unlevel floors will eventually cause each layers of tile to crack.

think about tiles with a rough or unsmooth end, since shiny surfaces are often slippery once wet.

-Preparing the ground, exactly cutting tiles into associate esthetically pleasing layout, applying and cleansing grout area unit simply many of the numerous long steps committed the installation of ceramic tile.

Process of installation new tile over old tile:

The following ways are may helpful tips when installing  tile over tile:

- First clean so sand the surface of the recent tile till it feels rough.Apply a thin coat of thin set mortar.

-Marge your nessecery area  carefully and collect counted number of square feet needed. For rectangular or square rooms, multiply the length by the width of the room, rounding all measurements up to the nearest foot. Calculate the sq. footage for every section and add them along.

-Check to examine that the subfloor is flat and level. Fill any low spots and cracks in an exceedingly concrete subfloor with concrete repair compound.

-Make up solely the maximum amount mortar combine as may be worked in 15-20 minutes. Keep a bucket of unpolluted water and a sponge handy to wipe off any excess before it sets and to scrub tools.

-Use a notched trowel to unfold the mortar equally on alittle space wherever you may begin giving birth the tile. Position the tile within the mortar on the rules and press into place.

- Check the alignment of the tiles as you go on to make certain they're each level and straight. once birthing tile, work from the subfloor to avoid golf stroke weight on the new tile, and permit it to line for 24-30 hours before walking on that.

-To do this, live the space to the wall, minus the breadth of the grout line, and mark every tile.

- When fitting border tile next to a wall, leave atiny low gap that's coated with molding or ovolo molding. make certain to line up the joints within the molding tile with the ground for an eternal look.

- The joints are to be filled with grout  after the tiles are laid and the mortar has set,.It is  need to clean the joints for removing any dust and debris before filling.

Depending on the kind of tile, we have a tendency to might want to use tile spacers to stay the joints straight and consistent. Some tiles have inbuilt spacers and sheet mounted tile is already spaced properly.